Blue Seas 60 AMP Circuit Breaker
Part Number: #QP-057-BS6
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 60 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 1100, 1300, 1600 Models
(Surface Mount)
Part Number: #QP-057-BS6
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 60 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 1100, 1300, 1600 Models
(Surface Mount)
Blue Seas 80 AMP Circuit Breaker
Part Number: QP-057-BS8
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 80 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 2100 Models
(Surface Mount)
Part Number: QP-057-BS8
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 80 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 2100 Models
(Surface Mount)
Blue Seas 120 AMP Circuit Breaker
Part Number: QP-057-BS12
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 120 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 3600 Models
(Surface Mount)
Part Number: QP-057-BS12
• Heavy Duty Resettable Thermal Circuit Breaker
• Trip Point Set at 120 AMPS
• Protective Rubber Terminal Caps
• Surface Mount
• Visible reset lever shows open condition
• Ignition protected – Safe for gas powered boats
• Waterproof
• Combines switching & Circuit Breaker Function into one unit
• Trip Free – cannot be held closed after trip
• Up to 48V DC rated
• Meets Standards
• Made in the U.S.A.
For All Styles, MTH, STH and STP and 3600 Models
(Surface Mount)
Wiring Harness
Part Number: QP-010-WH8
• Marine Grade 8 Gauge Wire, 20 feet (6.1m)
• Marine Grade Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat Shrink Tubing
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600) Models
Part Number: QP-010-WH8
• Marine Grade 8 Gauge Wire, 20 feet (6.1m)
• Marine Grade Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat Shrink Tubing
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600) Models
Wiring Harness
Part Number: QP-010-WH12
• Marine Grade 6 Gauge Wire, 22 feet (6.71m)
• Marine Grade Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat Shrink Tubing
• Made in the U.S.A.
For All Styles STH and STP and (2100) Models,
(Does NOT Include Circuit Breaker)
Part Number: QP-010-WH12
• Marine Grade 6 Gauge Wire, 22 feet (6.71m)
• Marine Grade Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat Shrink Tubing
• Made in the U.S.A.
For All Styles STH and STP and (2100) Models,
(Does NOT Include Circuit Breaker)
Micro-Switch Controller
Part Number: QP-055-MS
• Air-Over-Electrical Micro-Switch Controller
• Extra-Long Reach Bulkhead Thru-Hole Mount
• All Terminal Connector Lugs with Heat-Shrink Insulators
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Wiring Harness, Foot Bellows or Circuit Breaker)
Part Number: QP-055-MS
• Air-Over-Electrical Micro-Switch Controller
• Extra-Long Reach Bulkhead Thru-Hole Mount
• All Terminal Connector Lugs with Heat-Shrink Insulators
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Wiring Harness, Foot Bellows or Circuit Breaker)
Safe-T-Foot Switch Controller Bellows
Part Number: QP-055-AFB
• Non-Electrical Foot Control for all MTH, STH and STP Products
• Corrosion Resistant, Durable Plastic Material
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Water-Tight Construction
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Micro-Switch)
Part Number: QP-055-AFB
• Non-Electrical Foot Control for all MTH, STH and STP Products
• Corrosion Resistant, Durable Plastic Material
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Water-Tight Construction
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Micro-Switch)
Safe-T-Foot Switch Motor Controller
Part Number: QP-055-AS
• Non-Electrical Foot Control for all MTH, STH and STP Products
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulators
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Wiring Harness or Circuit Breaker)
Part Number: QP-055-AS
• Non-Electrical Foot Control for all MTH, STH and STP Products
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulators
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles MTH, STH and STP and (1100, 1300, 1600 and 2100) Models,
(Does NOT Include Wiring Harness or Circuit Breaker)
Safe-T-Foot Switch Wiring Kit 1100/1300
Part Number: QP-055-AS8-1100
• Non-Electrical Foot Control for all MTH Models and STH/STP 1100 & 1300 Models
• Complete Wiring Harness with 8 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles MTH and STH/STP (1100, 1300 and 1600) Models,
(Does NOT Include Circuit Breaker)
Part Number: QP-055-AS8-1100
• Non-Electrical Foot Control for all MTH Models and STH/STP 1100 & 1300 Models
• Complete Wiring Harness with 8 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles MTH and STH/STP (1100, 1300 and 1600) Models,
(Does NOT Include Circuit Breaker)
Safe-T-Foot Switch Wiring Kit 1600
Part Number: QP-055-AS8-1600
• Non-Electrical Foot Control for all 1600 STH and STP Models
• Complete Wiring Harness with 8 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles STH & STP (1600) Models,
(Does NOT Include Circuit Breaker)
Part Number: QP-055-AS8-1600
• Non-Electrical Foot Control for all 1600 STH and STP Models
• Complete Wiring Harness with 8 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles STH & STP (1600) Models,
(Does NOT Include Circuit Breaker)
Safe-T-Foot Switch Wiring Kit 2100
Part Number: QP-055-AS8-2100
• Non-Electrical Foot Control for all 2100 STH and STP Models
• Complete Wiring Harness with 22′ (6.71m) of 6 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles STH & STP (2100) Models,
(Does NOT Include Circuit Breaker)
Part Number: QP-055-AS8-2100
• Non-Electrical Foot Control for all 2100 STH and STP Models
• Complete Wiring Harness with 22′ (6.71m) of 6 Gauge Marine Grade Wire
• Terminal Connector Lugs
• Polyethylene Spiral Wrap Protective Sheath
• Heat-Shrink Tubing
• Air-Actuated Foot Bellows Controller
• Attached 6½’ by ¼” (1.98m by .635cm) Tubing
• Can be operated by hand or foot
• Air-Over-Electrical Micro-Switch Controller
• Marine Coated Continuous Duty 4-Pole Solenoid
• All Terminal Connector Lugs with Heat-Shrink Insulation
• Heat-Shrink Tubing
• Made in the U.S.A.
For All Styles STH & STP (2100) Models,
(Does NOT Include Circuit Breaker)
Marinco Connect Pro Medium Duty Plug/Receptacle Kit
Part Number: QP-106-MFC
• A Medium Duty Plug Receptacle Pair Kit
• Water Resistant when Connected
• Heavy Rubber Grips and Construction
• 6” (15.24cm) Pig Tail Leads
• Easy Installation
• Made in the U.S.A.
For All Styles MTH all Models, STH and STP, (1100, 1300 and 1600) Models
(Two Piece Plug/Receptacle Pair Only)
Part Number: QP-106-MFC
• A Medium Duty Plug Receptacle Pair Kit
• Water Resistant when Connected
• Heavy Rubber Grips and Construction
• 6” (15.24cm) Pig Tail Leads
• Easy Installation
• Made in the U.S.A.
For All Styles MTH all Models, STH and STP, (1100, 1300 and 1600) Models
(Two Piece Plug/Receptacle Pair Only)
Anderson Heavy Duty Connector Pair Kit
Part Number: QP-111-CON-HD
• A Heavy Duty Connector Pair
• Tuff Polycarbonate housing
• Silver Plated Crimp Connectors
• Water Resistant when Connected
• Heavy Duty Polycarbonate Construction
• Genderless Design Mates with Itself
• Molded in Panel Mounting Grooves
• Includes Panel/Bulkhead Mounts
• Includes Red ‘T’ Handle
• 600 VDC Rating
• Made in the U.S.A.
For STH and STP 2100 Models
(Complete Two Piece Genderless Connector Pair)
Part Number: QP-111-CON-HD
• A Heavy Duty Connector Pair
• Tuff Polycarbonate housing
• Silver Plated Crimp Connectors
• Water Resistant when Connected
• Heavy Duty Polycarbonate Construction
• Genderless Design Mates with Itself
• Molded in Panel Mounting Grooves
• Includes Panel/Bulkhead Mounts
• Includes Red ‘T’ Handle
• 600 VDC Rating
• Made in the U.S.A.
For STH and STP 2100 Models
(Complete Two Piece Genderless Connector Pair)